Camera
1. Infrared LEDs (Eight LEDs provide infrared light for night vision)
2. Lens
3. PIR Motion Detector
4. Microphone
5. Pivot
6. Mounting Bracket
7. Channel Selection Switch (Select the channel by sliding the slide switch to
the channel number you want. Note: Must select the same channel both on
the camera and monitor.)
8. Power cable
Monitor
1. Power/Volume Control
2. Screen ON/OFF
3. Power indicator LED
4. 13.5V Power Adapter Plug
5. Channel Selection Switch(Select the channel by sliding the slide switch to
the channel number you want. Note: Must select the same channel both on
monitor and receiver.)
6. Auto-sequence time intervals setting switch
7. Beeper volume level setting switch
8. Audio Output Jack(White)
9. Video Output Jack (Yellow)
10. V-HOLD
11. BRIGHT (Brightness)
12. CONT (Contrast)
Wireless B/W Surveillance Camera System CCSC005
₦26,450.00
What You Get
• One Camera
• One Monitor
• Two Power Adapters
• Mounting Bracket
• Waterproof Tape
• Fixing Screws and Masonry Plugs
• This User’s Manual
Note: TheAC adapters CANNOT be interchanged. Use only the adapter
labeled OUTPUT: 6V DC with the camera. Use only the adapter labeled
OUTPUT: 13.5VDC with the monitor.
Technical Specifications
Camera
Frequency – 2.4GHz
Channel – 4 selectable channels
A/V mod/demod. method – FM
Image Sensor – 1“4” CMOS image sensor
Effective pixels – EIA: 320 (H) x 240 (V)
CCJR: 352 (H) x 288 (V)
Lens – f3.6mm, F 2.0
Infrared LEDs – 8 pieces
Dimensions 9.3(W) x 14(H) x 6.7(D) cm
Weight – 300g
Power – DC 6V, 400mA
Operating temperature – -10oC – 40°C (14°F – 104°F)
Monitor
Frequency – 2.4GHz
Channel – 4 selectable channels
A/V mod/demod. method – FM
Display – 5.5 inch B’V monitor
Resolution at Center – V: 350 lines
H: 300 lines
Sound max. output – 800mW
Dimensions – 15.5(W) x 17(H) x 20(D) cm
Weight – 1310g
Power – DC I3.SY, 1000mA
Operating temperature O°C -40°C (32°F _ 104°F
Specifications subject to change without notice
Application
Recording on a VCR
1. The monitor comeswithAV (audio/video) output jacks for connecting to a VCR for recording.
2. Connect theAV cable’s(option) white and yellow plugs tothe white and
yellow AV jacks of the monitor and to the white and yellow input jacks of the VCR, matching the plug colors with the jacks on both the monitor and VCR.
PIR Motion Detection
The camera features a PIR motion detector which can automatically trigger the monitor when it senses motion. Set the beeper volume level by sliding the BEEPER HI/LO switch..
Audio Only
Screen can be turned off for audio monitoring only. To turn offscreen, push the button on the front panel as shown in the illustration on the right.
Night Vision
The camera has eight high-intensity LEDs for picking up clear images in unlit locations. The LEDs are always lit.
