• Halogen 500W lighting load capacity
• 140 degrees PIR motion sensor with no dead-angle wide view design • Time I Lux I Sensitivity
Flood Light Camera CCFC002
₦26,450.00
Technical Specifications
MODEL TYPE – 150W, 300W
VOLTAGE REQUIREMENT – AC110V – 220V SWITCHING POWER
LIGHTING LOAD – MAX. 150W, J-TYPE 78MM, MAX. 300W, J-TYPE
DETECTION MODE – PYRO-SENSOR
SENSOR SWIVELING ANGLE – 45° VERTICAL & HORIZONTAL
SUITABLE MOUNTING – WALL & CEILING MOUNT
TIME ADJUSTMENT – 4 SEC. – 12 MIN., VR ADJUSTABLE
LUX ADJUSTMENT – DAY – NIGHT, VR ADJUSTABLE
DETECTION RANGE – 5M – 12M, 140° (20°C), VR ADJUSTABLE
OPERATING TEMPERATURE – -20°C-40°C
WARM UPTIME – 30 SEC.
HIGH RESOLUTION COLOR CCD CAMERA
IMAGE PICK-UP DEVICE – SHARP 1/3″ COLOR HIGH RESOLUTION
EFFECTIVE PICTURE ELEMENTS – NTSC: 768*494, PAL: 752*582 (H*V)
HORIZONTAL RESOLUTION – 470 TV LINES
MINIMUM ILLUMINATION – 0.2 LUX @ F2.0
SIN RATIO – MORE THAN 48 dB
AUTO ELECTRONIC SHUTTER – NTSC:1/60S – 1/100,000S, PAL:1/50S – 1/110,000S
GAMMA CHARACTERISTIC – 0.45
LENS FURNISHED – BOARD LENS 3.6MM 1 F2.0 (OPTIONAL:4.3/6.0/8.0MM)
GAIN CONTROL – AUTOMATICALLY
WHITE BALANCE – AUTOMATICALLY (2500K – 9500K)
SYNCHRONOUS SYSTEM – NEGATIVE SYNC. INTERNAL
VIDEO OUTPUT – 1 VP-P COMPOSITE VIDEO 175 OHMS.
Application
IP55 Weatherproof housing, suitable for Garage I Entrance I Warehouse / Corridor / Packing Lot I Garden I Street and so on where require lighting and security.
NOTICE
1. Do not install the product in reverse or sideways to ensure the best performance
of detection range and protect the product from dripping water.
2. Install the product to a height of 2 – 2.5 meter is recommended for the best performance of detection range.
3. Check the voltage (AC 110V or AC 220V) before installation.
4. When replace a new halogen bulb, take it through a soft dry cloth, do not touch it directly by hand.
5. The motion sensor should not face the moving direction of objects. This will reduce the detection range
6. Install the product on a solid base and away from heat generating devices as the
high temperature could cause wrong detection of the motion sensor.